Please complete this form and we will contact you quickly.
With Its easy convertibility from one voltage to another A.C. (Alternating Current) reigns supreme in the generation transmission and distribution Systems. Yet DC (Direct Current)/ DC power supplies for Electroplating Plants, Electro chemical plants, Copper, Aluminium & Zinc Refining all requires modest Voltage and high DC current. DC power is also required in other Industrial processes like Hydrogenation & Electrolysis. Such continuous Power Industries look for a ‘Mehta Power’ economical and trouble free form of DC Power supply Systems. ‘Mehta Power’ offers a complete range of Rectifier Equipments for all such application and provides Engineering, Design and Technical support in choosing the right solution / Equipment.
| GENERAL SPECIFICATIONS | ||
|---|---|---|
| AC Input | Voltage | 380/440 volts |
| Phase | 3 | |
| Frequency | 50 Hz | |
| Customization | High Voltage Input up to 11 KV | |
| DC Output | Voltage | 8,12,16, 24 volts, 50 volts, 100 volts, 150 Volts, 200 Volts & 500 Volts |
| Current | 0-30000 Amps | |
| Customization | Power Systems up to 30000 Amps and voltages up to 500 V DC are available. |
Efficiency: Mehta Power Supplies are highly efficient with typically efficiency between 95-98% depending upon the DC voltage of the Unit.
Power Factor: 90% Rated output.
Rating: All components are rated as a standard for 100% continuous full load service in an ambient Temperature of 50°C.
Temperature: ‘Mehta Power’ design its systems for a maximum rise of temperature of 35°C at the top of the oil with an ambient temperature of 50°C.
Ripple Factor: As we use Double Star Hexa Phase Circuit with Interphase Transformer. So the ripple content is always Less than 4.5%.
Winding Material :– Splice free, electrolytically pure copper 99.9%
Core Material: – Low Loss, High quality, Grain Oriented Silicon Steel provides good flux and low eddy current losses
Insulation Material : – ‘A’ Class Insulation is used for ONAN systems.
Process :- The coils are vacuum impregnated by Varnish and then baked to cure. Varnishing provides additional electromechanical Strength. All coils are wound for stress distribution under fault conditions to provide superior mechanical strength.
Cooling: – ‘Mehta Power’ supplies are designed for optimum low loss/efficient operation and employ specially designed natural oil cooling to remove the heat generated during operation.
Controls: – The following are examples of typically required Control configurations. ‘Mehta Power’ is committed to working with each Customer on an individual basis to ensure your Control requirements are satisfied.
Semiconductors: ‘Mehta Power’ selects its semiconductors with an appropriate 200% safety factor to provide the ultimate in reliability. This design criterion limits the junction temperature of semiconductor to typically less than 80 °C , thus enhancing the life of the equipment.
MS Shell : The enclosure i.e. mild steel steels are fabricated with 8/10/12 SWG HR sheets. The requisite supports along with seam welded cooling fins are provided to dissipate the heat produced. The housing is checked for leakage with pressure testing. The job is then paint finished inside and outside by degreasing and acid resistant Epoxy Paint. Standard Paint will be BS Grey. Change of shade on request.
Ripple: Standard 6 pulse DC Rectifier will contain less than 5% RMS AC Ripple when operated at Rated Voltage and Current.
Training: Mehta Power’s service Engineer may instruct our customer’s operator and Maintenance personnel during the commissioning /start of the unit or during final test at our works. This can be operational training and / or full Maintenance repair training.
Spare Parts: ‘Mehta Power’ maintains a considerable spare parts inventory and has the appropriate factory approved spare parts on hand and ready for your use to assure maximum uptime of your process. Mehta’s power supplies are designed for decades of trouble free performance when the installation and maintenance guidelines contained in the service manual are followed.
D.C. BUS BAR: ‘Mehta Power’ uses Electrolytically pure Copper/ Aluminium bus bar exclusively in our rectifier systems. Bus Block with bolted joints and flexible connections are designed to minimize bus losses and to match the client’s application requirement. The laminated bus structure designed maintain a low bus impedance and low voltage over shoot.
Each piece of equipment we build is rigorously tested and put through a systematic quality control examination prior to dispatch. Our test facility utilize state of art equipment to verify that the Power Supply you receive is exactly what you ordered. Our staff of highly competent test technicians performs a full range of operational and functional testing and maintains complete documentation of all test procedures and results. Prior to dispatch/ shipment a final quality control inspection is performed.
© Mehta power - 2020 | All Right Reserved. Designed By We Choice